• Українська
  • English
  • Русский
ISSN 2664-2441 (Online)
ISSN 2073-9583 (Print)

Structure and properties of cast steels depending on thermokinetic parameters of treatment and crystallization of melt

Metalozn. obrobka met., 2019, Tom 90, No 2, cc.32-43
https://doi.org/10.15407/mom2019.02.032

S.Ye. Kondratyuk, Doctor of Technical Science, Professor, Head of Department, stkondrat@gmail.com
V.I. Veis, postgraduate, nikusik123@yandex.ru
Z.V. Parkhomchuk, Candidate of Technical Science (Ph.D.), Senior Research Fellow, zhanna.mom@ptima.kiev.ua
O.O. Tokareva, chief mathematician, olgatokareva@ukr.net

Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv

UDC 669.18-412:621.746
Download: PDF

Summary

The effect of the overheating temperature of steel melts above equilibrium liquidus (20…170 °C) and cooling rate at crystallization (5…650 °C/c) on characteristics of cast structure and mechanical properties of  structural steels 25Л, 25ХГСТФЛ, 45Л, 45ХГСТФЛ was researched. The regular increase in the dispersion and mechanical properties of their cast structure under conditions of rapid cooling and an increase in the temperature gradient during crystallization was established. Based on the results of experiments, interpolation equations of the effect of melt overheating and cooling rates on the structural and mechanical properties of steels are obtained. The obtained equations allow to predict the properties of castings within the studied factor space.

Keywords: steel, melt, crystallization, mechanical properties.

Referances

1. Efimov V.A. Razlivka i kristallizatsiya stali (Casting and crystallization of steel),  Moskva: Metallurgiya, 1976, 552 p. [in Russian].

2. Veynik A.I. Teplovyye osnovy teorii litya (Thermal foundations of the theory of casting), Moskva: Mashgiz,1948, 163 p. [in Russian].

3. Kumanin I.B. Voprosy teorii liteynykh protsessov (Questions of the theory of casting processes), Moskva: Mashinostroyeniye, 1976, 216 p. [in Russian].

4. Gulyayev B.B. Teoriya liteynykh protsessov (Theory of casting processes),  Leningrad.: Mashinostroyeniye, 1976, 216 p. [in Russian].

5. Dreyper N., Smit G. Prikladnoy regressionnyy analiz (Applied regression analysis), Moskva: Mir, 1973, 424 p. [in Russian].

6. Khartman K., Letski E., Sheffer V. Planirovaniye eksperimenta v issledovanii tekhnologicheskikh protsessov, (Planning of an experiment in the study of technological processes), Moskva: Mir, 1980, 540 p. [in Russian].

7. Byalik O.M., Kondratyuk S.Ye., Kindrachuk M.V., Chernenko V.S. Strukturniy analiz metaliv. Metalohrafiya, fraktohrafiya (Structural analysis of metals. Metallography, fractography), Kyiv: Politekhnika, 2006, 326 p. [in Ukrainian].

8. Golikov I.N., Goldshteyn M.I., Murzin O.I. Vanadiy v stali (Vanadium in steel), Moskva: Metallurgiya, 1968, 292 p. [in Russian].