• Українська
  • English
  • Русский
ISSN 2664-2441 (Online)
ISSN 2073-9583 (Print)

Crystallization and structure of steel ingots under conditions of endogenous vibration treatment

Metalozn. obrobka met., 2018, Tom 87, No 3, сс. 41-47
https://doi.org/10.15407/mom2018.03.041

S. Ye. Kondratyuk, Doctor of Technical Science, Professor
V. M. Shcheglov, Candidate of Technical Science (Ph.D.)
V. I. Veis

Physico-Technological Institute of Metals and Alloys of NAS of Ukraine, Kyiv

UDC 621.74.047
Download: PDF

Summary

The effect of endogenous vibration treatment on kinetic parameters and characteristics of structure of a solidifying melt was studied on 16,3 t ingot of steel grade Х18Н10Т. Significant improvement in the quality of the ingot, homogeneity and dispersion of its cast structure, change in the extent of the main structural zones along the height and cross section of the ingot, the distribution and the number of nonmetallic inclusions are shown. An increase in impact strength by 25 – 30 % in rolled steel made from the ingot metal, which was subjected to endogenous vibration treatment during crystallization of the melt, was established.

References

1. Campbell J. (1981). Effects of vibration during solidification. International Metals Review, no 2, pp. 71 – 108 [in English].
https://doi.org/10.1179/imtr.1981.26.1.71
2. Balandin G.F. (1979). Formirovanie kristallicheskogo stroeniya otlivok [Formation of the crystalline structure of castings]. M.: Mashinostroenie, 288 p. [in Russian].
3. Nejmark V.E. (1977). Modificirovannyj stalnoj slitok [Modified steel ingot]. – M.: Metallurgiya. – 200 p. [in Russian].
4. Pilyushenko V.L., Smirnov A.N., Pettik Yu.V. (1992). Vliyanie nizkochastotnoj vibroobrabotki na formirovanie i kachestvo slitkov [The influence of low-frequency vibration processing on the formation and quality of ingots]. Stal, no 8, pp.17-22 [in Russian].
5. Borodulin G.M., Moshkevich E.I. Nerzhaveyushaya stal [Stainless steel]. – M.: Metallurgiya. – 319 p. [in Russian].